AutoEq / EqualizerAPO preset for YINCROW - X6 Wired Earphone - Black / Mic

Generated from this product's measured frequency response (source: AutoEq · HypetheSonics), corrected toward an approximate Harman in-ear (IE 2019) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# YINCROW - X6 Wired Earphone - Black / Mic - AutoEq-style parametric preset (measured: AutoEq · HypetheSonics)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman in-ear (IE 2019) target; estimate, treat as a starting point)
Preamp: -12.3 dB
Filter 1: ON LSC Fc 105 Hz Gain 12.0 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain 0.6 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain -5.2 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain 0.3 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain 0.4 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain -0.8 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain 1.6 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain 9.4 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain 7.3 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain 4.9 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -20.6 dB
GraphicEQ: 20 20.3; 27 17.2; 36 14.4; 47 10.9; 63 7.4; 84 4.5; 112 2.6; 150 1.3; 200 0.3; 267 1.3; 356 0.1; 474 0.1; 632 -0.0; 843 -0.1; 1125 0.8; 1500 3.1; 2000 6.6; 2667 9.8; 3557 12.1; 4743 8.4; 6325 10.3; 8434 6.1; 11247 6.1; 14998 13.3; 20000 16.6

CSV band table (phone-app EQs)

105,12.0,0.7
40,0.6,2
90,-5.2,1.4
180,0.3,1.4
375,0.4,1.4
750,-0.8,1.4
1500,1.6,1.4
3000,9.4,1.4
6000,7.3,1.4
10000,4.9,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.