AutoEq / EqualizerAPO preset for Dan Clark Audio ETHER C Flow 1.1 Headphone - 4-pin XLR / 6' (1.8m)

Generated from this product's measured frequency response (source: AutoEq · oratory1990), corrected toward an approximate Harman over-ear (OE 2018) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# Dan Clark Audio ETHER C Flow 1.1 Headphone - 4-pin XLR / 6' (1.8m) - AutoEq-style parametric preset (measured: AutoEq · oratory1990)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman over-ear (OE 2018) target; estimate, treat as a starting point)
Preamp: -3.8 dB
Filter 1: ON LSC Fc 105 Hz Gain 1.6 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain 0.8 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain 0.4 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain 0.9 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain -0.2 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain -0.8 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain 3.0 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain 3.5 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain 1.3 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain 2.5 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -6.3 dB
GraphicEQ: 20 1.3; 27 1.5; 36 2.0; 47 2.6; 63 3.2; 84 1.6; 112 0.4; 150 1.8; 200 1.0; 267 0.2; 356 -0.1; 474 0.1; 632 0.0; 843 -0.2; 1125 0.9; 1500 3.4; 2000 6.0; 2667 4.3; 3557 2.5; 4743 3.5; 6325 0.8; 8434 4.8; 11247 1.7; 14998 1.6; 20000 -14.2

CSV band table (phone-app EQs)

105,1.6,0.7
40,0.8,2
90,0.4,1.4
180,0.9,1.4
375,-0.2,1.4
750,-0.8,1.4
1500,3.0,1.4
3000,3.5,1.4
6000,1.3,1.4
10000,2.5,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.