AutoEq / EqualizerAPO preset for TINHIFI TIN T3 1DD+1BA In-ear Headphone

Generated from this product's measured frequency response (source: AutoEq · RikudouGoku), corrected toward an approximate Harman in-ear (IE 2019) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# TINHIFI TIN T3 1DD+1BA In-ear Headphone - AutoEq-style parametric preset (measured: AutoEq · RikudouGoku)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman in-ear (IE 2019) target; estimate, treat as a starting point)
Preamp: -5.1 dB
Filter 1: ON LSC Fc 105 Hz Gain 0.9 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain 0.0 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain -2.4 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain -4.0 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain -2.7 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain 0.1 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain -0.3 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain 4.8 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain -1.4 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain -7.4 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -13.1 dB
GraphicEQ: 20 1.9; 27 1.1; 36 0.6; 47 -0.1; 63 -1.1; 84 -2.4; 112 -3.2; 150 -4.3; 200 -5.1; 267 -4.3; 356 -3.4; 474 -2.4; 632 -1.0; 843 0.0; 1125 0.2; 1500 0.8; 2000 0.2; 2667 3.0; 3557 6.1; 4743 1.5; 6325 -1.0; 8434 -10.9; 11247 -8.1; 14998 6.1; 20000 12.8

CSV band table (phone-app EQs)

105,0.9,0.7
40,0.0,2
90,-2.4,1.4
180,-4.0,1.4
375,-2.7,1.4
750,0.1,1.4
1500,-0.3,1.4
3000,4.8,1.4
6000,-1.4,1.4
10000,-7.4,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.