AutoEq / EqualizerAPO preset for TANGZU - x SeeAudio Shimin Li Encounter Edition Wired IEM

Generated from this product's measured frequency response (source: AutoEq · Bakkwatan), corrected toward an approximate Harman in-ear (IE 2019) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# TANGZU - x SeeAudio Shimin Li Encounter Edition Wired IEM - AutoEq-style parametric preset (measured: AutoEq · Bakkwatan)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman in-ear (IE 2019) target; estimate, treat as a starting point)
Preamp: -5.7 dB
Filter 1: ON LSC Fc 105 Hz Gain 0.8 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain 0.4 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain -1.1 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain -2.1 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain -0.5 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain 0.9 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain -1.1 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain -0.7 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain 5.4 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain -0.2 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -7.8 dB
GraphicEQ: 20 1.2; 27 1.0; 36 1.1; 47 0.8; 63 0.1; 84 -0.8; 112 -1.6; 150 -2.1; 200 -2.5; 267 -1.6; 356 -0.8; 474 -0.2; 632 0.6; 843 0.6; 1125 -0.1; 1500 -0.6; 2000 -1.9; 2667 -0.6; 3557 0.9; 4743 3.7; 6325 7.5; 8434 -0.9; 11247 -4.4; 14998 -1.8; 20000 0.2

CSV band table (phone-app EQs)

105,0.8,0.7
40,0.4,2
90,-1.1,1.4
180,-2.1,1.4
375,-0.5,1.4
750,0.9,1.4
1500,-1.1,1.4
3000,-0.7,1.4
6000,5.4,1.4
10000,-0.2,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.