AutoEq / EqualizerAPO preset for TANCHJIM Tanya DD In-Ear Headphone - 3.5mm no mic

Generated from this product's measured frequency response (source: AutoEq · Fahryst), corrected toward an approximate Harman in-ear (IE 2019) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# TANCHJIM Tanya DD In-Ear Headphone - 3.5mm no mic - AutoEq-style parametric preset (measured: AutoEq · Fahryst)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman in-ear (IE 2019) target; estimate, treat as a starting point)
Preamp: -1.7 dB
Filter 1: ON LSC Fc 105 Hz Gain -0.1 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain -0.6 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain -4.3 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain -5.6 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain -3.0 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain 0.0 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain 1.4 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain -1.3 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain -1.2 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain -1.2 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -2.2 dB
GraphicEQ: 20 1.4; 27 -0.1; 36 -1.1; 47 -2.3; 63 -3.7; 84 -5.1; 112 -6.1; 150 -6.7; 200 -7.0; 267 -5.6; 356 -4.1; 474 -2.9; 632 -1.1; 843 0.1; 1125 0.3; 1500 1.0; 2000 1.2; 2667 -1.3; 3557 -2.5; 4743 0.3; 6325 -1.9; 8434 -3.9; 11247 1.9; 14998 -6.8; 20000 -16.0

CSV band table (phone-app EQs)

105,-0.1,0.7
40,-0.6,2
90,-4.3,1.4
180,-5.6,1.4
375,-3.0,1.4
750,0.0,1.4
1500,1.4,1.4
3000,-1.3,1.4
6000,-1.2,1.4
10000,-1.2,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.