AutoEq / EqualizerAPO preset for STAX SR-X9000 Earspeakers

Generated from this product's measured frequency response (source: AutoEq · oratory1990), corrected toward an approximate Harman over-ear (OE 2018) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# STAX SR-X9000 Earspeakers - AutoEq-style parametric preset (measured: AutoEq · oratory1990)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman over-ear (OE 2018) target; estimate, treat as a starting point)
Preamp: -10.7 dB
Filter 1: ON LSC Fc 105 Hz Gain 10.4 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain 1.8 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain 0.2 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain 3.3 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain 4.0 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain 1.1 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain 2.0 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain 5.5 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain 4.1 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain 5.0 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -14.1 dB
GraphicEQ: 20 13.8; 27 12.8; 36 12.0; 47 11.4; 63 8.9; 84 7.9; 112 7.1; 150 5.9; 200 4.6; 267 4.7; 356 4.7; 474 4.6; 632 4.3; 843 1.3; 1125 0.1; 1500 4.4; 2000 5.5; 2667 6.6; 3557 6.2; 4743 5.8; 6325 4.4; 8434 5.8; 11247 0.9; 14998 3.1; 20000 -5.9

CSV band table (phone-app EQs)

105,10.4,0.7
40,1.8,2
90,0.2,1.4
180,3.3,1.4
375,4.0,1.4
750,1.1,1.4
1500,2.0,1.4
3000,5.5,1.4
6000,4.1,1.4
10000,5.0,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.