AutoEq / EqualizerAPO preset for Sony MDR-MV1 Wired High Resolution Monitor Headphones, Spatial Sound

Generated from this product's measured frequency response (source: AutoEq · Rtings), corrected toward an approximate Harman over-ear (OE 2018) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# Sony MDR-MV1 Wired High Resolution Monitor Headphones, Spatial Sound - AutoEq-style parametric preset (measured: AutoEq · Rtings)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman over-ear (OE 2018) target; estimate, treat as a starting point)
Preamp: -2.8 dB
Filter 1: ON LSC Fc 105 Hz Gain 2.5 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain -0.6 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain -2.8 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain -2.6 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain -1.5 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain 0.0 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain 1.2 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain 0.9 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain -1.0 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain -7.7 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -5.9 dB
GraphicEQ: 20 4.4; 27 3.1; 36 1.7; 47 0.5; 63 -0.4; 84 -1.5; 112 -2.2; 150 -2.8; 200 -3.3; 267 -2.6; 356 -2.0; 474 -1.4; 632 -0.4; 843 0.1; 1125 0.9; 1500 1.6; 2000 1.2; 2667 -1.5; 3557 1.4; 4743 5.6; 6325 -3.6; 8434 -11.4; 11247 -4.2; 14998 -5.5; 20000 0.1

CSV band table (phone-app EQs)

105,2.5,0.7
40,-0.6,2
90,-2.8,1.4
180,-2.6,1.4
375,-1.5,1.4
750,0.0,1.4
1500,1.2,1.4
3000,0.9,1.4
6000,-1.0,1.4
10000,-7.7,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.