AutoEq / EqualizerAPO preset for Softears RS10 10BA IEM In-Ear Monitor Earphone - RS10 3.5mm

Generated from this product's measured frequency response (source: AutoEq · Jaytiss), corrected toward an approximate Harman in-ear (IE 2019) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt

Parametric preset (AutoEq / EqualizerAPO format)

# Softears RS10 10BA IEM In-Ear Monitor Earphone - RS10 3.5mm - AutoEq-style parametric preset (measured: AutoEq · Jaytiss)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman in-ear (IE 2019) target; estimate, treat as a starting point)
Preamp: -4.2 dB
Filter 1: ON LSC Fc 105 Hz Gain 3.9 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain 0.5 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain -0.9 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain 0.0 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain -0.1 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain -0.1 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain 1.1 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain 2.4 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain 3.6 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain 3.0 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -7.0 dB
GraphicEQ: 20 5.5; 27 4.7; 36 4.2; 47 3.5; 63 2.7; 84 1.7; 112 1.2; 150 0.8; 200 -0.2; 267 0.0; 356 -0.0; 474 -0.1; 632 0.3; 843 0.4; 1125 0.3; 1500 1.9; 2000 2.4; 2667 2.4; 3557 2.8; 4743 6.7; 6325 4.5; 8434 -2.7; 11247 6.7; 14998 2.3; 20000 2.3

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.