AutoEq / EqualizerAPO preset for Sennheiser RS 195 - RF Wireless Headphone

Generated from this product's measured frequency response (source: AutoEq · Rtings), corrected toward an approximate Harman over-ear (OE 2018) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# Sennheiser RS 195 - RF Wireless Headphone - AutoEq-style parametric preset (measured: AutoEq · Rtings)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman over-ear (OE 2018) target; estimate, treat as a starting point)
Preamp: -6.7 dB
Filter 1: ON LSC Fc 105 Hz Gain -6.1 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain -0.6 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain 1.9 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain 3.0 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain 1.9 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain -0.2 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain 1.2 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain -5.8 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain 6.4 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain -4.2 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -10.6 dB
GraphicEQ: 20 -6.8; 27 -6.7; 36 -5.9; 47 -5.5; 63 -6.8; 84 -2.4; 112 2.6; 150 2.9; 200 1.5; 267 3.4; 356 2.6; 474 1.4; 632 0.6; 843 0.4; 1125 -0.1; 1500 -1.8; 2000 10.3; 2667 -8.5; 3557 -3.8; 4743 4.4; 6325 7.3; 8434 -0.1; 11247 -4.3; 14998 -6.0; 20000 -5.5

CSV band table (phone-app EQs)

105,-6.1,0.7
40,-0.6,2
90,1.9,1.4
180,3.0,1.4
375,1.9,1.4
750,-0.2,1.4
1500,1.2,1.4
3000,-5.8,1.4
6000,6.4,1.4
10000,-4.2,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.