AutoEq / EqualizerAPO preset for Sennheiser Momentum 4 - Wireless Noise Cancelling Over Ear Headphone (Denim)

Generated from this product's measured frequency response (source: AutoEq · Innerfidelity), corrected toward an approximate Harman over-ear (OE 2018) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# Sennheiser Momentum 4 - Wireless Noise Cancelling Over Ear Headphone (Denim) - AutoEq-style parametric preset (measured: AutoEq · Innerfidelity)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman over-ear (OE 2018) target; estimate, treat as a starting point)
Preamp: -10.6 dB
Filter 1: ON LSC Fc 105 Hz Gain 4.8 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain 0.4 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain 2.3 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain 4.2 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain 6.5 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain 1.5 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain -3.2 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain 2.3 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain 10.3 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain 7.2 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -15.5 dB
GraphicEQ: 20 7.5; 27 4.7; 36 5.2; 47 5.9; 63 6.2; 84 6.2; 112 6.3; 150 6.0; 200 5.8; 267 7.0; 356 7.8; 474 6.4; 632 3.9; 843 1.3; 1125 -0.2; 1500 -1.7; 2000 -2.9; 2667 0.9; 3557 5.8; 4743 5.6; 6325 12.2; 8434 9.8; 11247 5.8; 14998 15.2; 20000 7.4

CSV band table (phone-app EQs)

105,4.8,0.7
40,0.4,2
90,2.3,1.4
180,4.2,1.4
375,6.5,1.4
750,1.5,1.4
1500,-3.2,1.4
3000,2.3,1.4
6000,10.3,1.4
10000,7.2,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.