AutoEq / EqualizerAPO preset for Sennheiser - IE 600

Generated from this product's measured frequency response (source: AutoEq · Fahryst), corrected toward an approximate Harman in-ear (IE 2019) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt

Parametric preset (AutoEq / EqualizerAPO format)

# Sennheiser - IE 600 - AutoEq-style parametric preset (measured: AutoEq · Fahryst)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman in-ear (IE 2019) target; estimate, treat as a starting point)
Preamp: -4.6 dB
Filter 1: ON LSC Fc 105 Hz Gain -0.4 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain 0.5 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain 0.6 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain -0.9 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain -0.1 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain 0.6 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain -1.1 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain 4.3 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain 3.4 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain -6.7 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -6.4 dB
GraphicEQ: 20 -0.8; 27 -0.8; 36 -0.1; 47 0.4; 63 0.5; 84 0.2; 112 -0.1; 150 -0.6; 200 -1.0; 267 -0.6; 356 -0.1; 474 0.1; 632 0.6; 843 0.6; 1125 -0.1; 1500 0.0; 2000 0.4; 2667 2.8; 3557 6.1; 4743 5.9; 6325 3.1; 8434 -2.9; 11247 -3.5; 14998 -11.1; 20000 4.1

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.