AutoEq / EqualizerAPO preset for Sennheiser HD 800 S - Wired Audiophile Headphones

Generated from this product's measured frequency response (source: AutoEq · Auriculares Argentina), corrected toward an approximate Harman over-ear (OE 2018) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# Sennheiser HD 800 S - Wired Audiophile Headphones - AutoEq-style parametric preset (measured: AutoEq · Auriculares Argentina)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman over-ear (OE 2018) target; estimate, treat as a starting point)
Preamp: -5.9 dB
Filter 1: ON LSC Fc 105 Hz Gain 5.6 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain 0.6 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain -1.0 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain -1.5 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain -1.0 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain -0.9 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain 2.5 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain 2.6 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain -2.1 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain -0.3 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -7.9 dB
GraphicEQ: 20 7.6; 27 6.6; 36 5.8; 47 5.2; 63 4.5; 84 2.5; 112 1.1; 150 -0.5; 200 -1.8; 267 -1.5; 356 -1.3; 474 -1.0; 632 -0.8; 843 -0.6; 1125 1.2; 1500 3.1; 2000 3.2; 2667 1.6; 3557 3.6; 4743 0.1; 6325 -2.9; 8434 0.1; 11247 -2.2; 14998 -4.6; 20000 -9.7

CSV band table (phone-app EQs)

105,5.6,0.7
40,0.6,2
90,-1.0,1.4
180,-1.5,1.4
375,-1.0,1.4
750,-0.9,1.4
1500,2.5,1.4
3000,2.6,1.4
6000,-2.1,1.4
10000,-0.3,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.