AutoEq / EqualizerAPO preset for Sennheiser - HD 560S

Generated from this product's measured frequency response (source: AutoEq · Auriculares Argentina), corrected toward an approximate Harman over-ear (OE 2018) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt

Parametric preset (AutoEq / EqualizerAPO format)

# Sennheiser - HD 560S - AutoEq-style parametric preset (measured: AutoEq · Auriculares Argentina)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman over-ear (OE 2018) target; estimate, treat as a starting point)
Preamp: -7.3 dB
Filter 1: ON LSC Fc 105 Hz Gain 7.0 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain -0.4 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain -1.5 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain 0.1 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain 0.9 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain 0.0 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain 1.8 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain 0.5 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain -0.9 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain 4.9 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -11.0 dB
GraphicEQ: 20 10.7; 27 8.3; 36 6.6; 47 5.1; 63 4.3; 84 3.4; 112 2.3; 150 1.1; 200 0.3; 267 0.8; 356 1.0; 474 0.9; 632 0.9; 843 0.4; 1125 0.6; 1500 2.0; 2000 2.9; 2667 0.9; 3557 0.8; 4743 -1.4; 6325 0.7; 8434 -0.0; 11247 8.1; 14998 -1.7; 20000 -24.5

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.