AutoEq / EqualizerAPO preset for Canpur PERFORMANCE series: CP622B (4.4mm) (Like New)

Generated from this product's measured frequency response (source: AutoEq · Fahryst), corrected toward an approximate Harman in-ear (IE 2019) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt

Parametric preset (AutoEq / EqualizerAPO format)

# Canpur PERFORMANCE series: CP622B (4.4mm) (Like New) - AutoEq-style parametric preset (measured: AutoEq · Fahryst)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman in-ear (IE 2019) target; estimate, treat as a starting point)
Preamp: -5.1 dB
Filter 1: ON LSC Fc 105 Hz Gain -0.7 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain 0.6 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain 0.9 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain -0.2 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain -0.9 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain -0.9 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain 1.3 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain 2.8 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain 4.8 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain -3.1 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -6.7 dB
GraphicEQ: 20 -1.6; 27 -1.0; 36 -0.2; 47 0.3; 63 0.5; 84 0.4; 112 0.2; 150 -0.0; 200 -0.7; 267 -0.4; 356 -0.8; 474 -1.4; 632 -1.2; 843 -0.1; 1125 0.5; 1500 1.8; 2000 2.9; 2667 2.3; 3557 4.8; 4743 4.7; 6325 6.4; 8434 -3.3; 11247 -3.2; 14998 -5.4; 20000 0.4

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.