AutoEq / EqualizerAPO preset for MOONDROP JOKER 50mm Dynamic Driver Full-Size Over-ear Headphone

Generated from this product's measured frequency response (source: AutoEq · Filk), corrected toward an approximate Harman over-ear (OE 2018) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# MOONDROP JOKER 50mm Dynamic Driver Full-Size Over-ear Headphone - AutoEq-style parametric preset (measured: AutoEq · Filk)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman over-ear (OE 2018) target; estimate, treat as a starting point)
Preamp: -10.5 dB
Filter 1: ON LSC Fc 105 Hz Gain 10.2 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain -0.3 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain -4.2 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain 0.0 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain 3.1 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain 2.0 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain -2.0 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain -1.1 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain 1.2 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain -0.3 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -16.2 dB
GraphicEQ: 20 15.9; 27 12.2; 36 9.4; 47 7.2; 63 5.5; 84 2.5; 112 1.6; 150 0.9; 200 0.7; 267 2.2; 356 3.3; 474 3.7; 632 1.9; 843 1.8; 1125 0.2; 1500 -0.6; 2000 -4.2; 2667 -4.8; 3557 4.4; 4743 3.5; 6325 -2.1; 8434 -0.3; 11247 -0.7; 14998 -4.4; 20000 -6.3

CSV band table (phone-app EQs)

105,10.2,0.7
40,-0.3,2
90,-4.2,1.4
180,0.0,1.4
375,3.1,1.4
750,2.0,1.4
1500,-2.0,1.4
3000,-1.1,1.4
6000,1.2,1.4
10000,-0.3,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.