AutoEq / EqualizerAPO preset for Moondrop Horizon 50mm UHE Dynamic Driver Over-Ear Headphone

Generated from this product's measured frequency response (source: AutoEq · Super Review), corrected toward an approximate Harman over-ear (OE 2018) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# Moondrop Horizon 50mm UHE Dynamic Driver Over-Ear Headphone - AutoEq-style parametric preset (measured: AutoEq · Super Review)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman over-ear (OE 2018) target; estimate, treat as a starting point)
Preamp: -12.3 dB
Filter 1: ON LSC Fc 105 Hz Gain 10.1 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain 0.5 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain -2.3 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain 0.0 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain 1.3 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain 0.6 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain 2.4 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain 3.0 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain 5.3 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain 12.0 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -16.1 dB
GraphicEQ: 20 14.4; 27 12.2; 36 10.4; 47 8.6; 63 6.5; 84 4.7; 112 3.2; 150 1.8; 200 0.5; 267 0.6; 356 1.4; 474 2.2; 632 2.2; 843 0.6; 1125 1.2; 1500 4.2; 2000 3.6; 2667 1.1; 3557 8.2; 4743 6.6; 6325 6.8; 8434 10.0; 11247 15.8; 14998 -0.4; 20000 -12.7

CSV band table (phone-app EQs)

105,10.1,0.7
40,0.5,2
90,-2.3,1.4
180,0.0,1.4
375,1.3,1.4
750,0.6,1.4
1500,2.4,1.4
3000,3.0,1.4
6000,5.3,1.4
10000,12.0,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.