AutoEq / EqualizerAPO preset for Meze Audio EMPYREAN II (Like New)

Generated from this product's measured frequency response (source: AutoEq · kr0mka), corrected toward an approximate Harman over-ear (OE 2018) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt

Parametric preset (AutoEq / EqualizerAPO format)

# Meze Audio EMPYREAN II (Like New) - AutoEq-style parametric preset (measured: AutoEq · kr0mka)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman over-ear (OE 2018) target; estimate, treat as a starting point)
Preamp: -4.6 dB
Filter 1: ON LSC Fc 105 Hz Gain 1.0 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain 0.5 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain -1.8 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain -4.1 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain -0.5 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain -0.8 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain 4.3 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain -2.4 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain -4.1 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain 1.0 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -4.6 dB
GraphicEQ: 20 1.6; 27 1.3; 36 1.3; 47 1.0; 63 -0.5; 84 -1.7; 112 -2.7; 150 -3.8; 200 -5.1; 267 -2.8; 356 -1.0; 474 -0.8; 632 -0.5; 843 -0.5; 1125 1.9; 1500 4.3; 2000 2.9; 2667 -1.4; 3557 -4.1; 4743 -4.1; 6325 -3.8; 8434 -3.6; 11247 -0.4; 14998 -5.7; 20000 -23.4

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.