AutoEq / EqualizerAPO preset for 【KZ PR3】 Planar Magnetic In-Ear Monitor – 13.2mm Custom Mold Silver-Plated Diaphragm, 15Ω Low Impedance, High Sensitivity, N52H Magnet Array - Black with mic

Generated from this product's labeled estimate curve - the family tuning the product page graphs, derived from its driver type and tuning family, not a lab measurement - corrected toward an approximate Harman in-ear (IE 2019) target. When a measured curve for this product lands, the preset regenerates from it automatically. Treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# 【KZ PR3】 Planar Magnetic In-Ear Monitor – 13.2mm Custom Mold Silver-Plated Diaphragm, 15Ω Low Impedance, High Sensitivity, N52H Magnet Array - Black with mic - AutoEq-style parametric preset (estimated: family tuning (not a measurement))
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman in-ear (IE 2019) target; estimate, treat as a starting point)
Preamp: -7.1 dB
Filter 1: ON LSC Fc 105 Hz Gain 2.3 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain 0.7 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain -0.5 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain -1.4 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain 0.1 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain -0.7 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain 1.7 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain 6.8 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain 4.7 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain -3.7 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -8.1 dB
GraphicEQ: 20 2.8; 27 2.7; 36 2.7; 47 2.6; 63 2.1; 84 0.9; 112 -0.1; 150 -0.8; 200 -1.5; 267 -0.7; 356 0.1; 474 -0.0; 632 -0.1; 843 -0.0; 1125 0.8; 1500 2.9; 2000 5.0; 2667 7.3; 3557 7.8; 4743 6.7; 6325 5.1; 8434 1.6; 11247 -4.0; 14998 -9.7; 20000 -21.4

CSV band table (phone-app EQs)

105,2.3,0.7
40,0.7,2
90,-0.5,1.4
180,-1.4,1.4
375,0.1,1.4
750,-0.7,1.4
1500,1.7,1.4
3000,6.8,1.4
6000,4.7,1.4
10000,-3.7,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

This preset comes from an estimated curve - the file header says so, and the graph on the product page shows the same estimate. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.