AutoEq / EqualizerAPO preset for ESP/95X Plus

Generated from this product's measured frequency response (source: SBAF HPDB · MiniDSP EARS 3.0), corrected toward an approximate Harman over-ear (OE 2018) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# ESP/95X Plus - AutoEq-style parametric preset (measured: SBAF HPDB · MiniDSP EARS 3.0)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman over-ear (OE 2018) target; estimate, treat as a starting point)
Preamp: -10.1 dB
Filter 1: ON LSC Fc 105 Hz Gain 9.8 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain 3.4 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain -2.2 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain 0.8 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain 1.3 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain 0.3 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain 1.5 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain 9.4 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain 4.3 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain 3.0 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -13.2 dB
GraphicEQ: 20 12.9; 27 12.2; 36 12.5; 47 12.3; 63 6.7; 84 4.5; 112 3.6; 150 2.6; 200 1.3; 267 1.2; 356 1.6; 474 2.0; 632 1.5; 843 1.4; 1125 0.7; 1500 3.2; 2000 5.7; 2667 11.2; 3557 9.2; 4743 8.5; 6325 4.9; 8434 5.7; 11247 3.3; 14998 -6.1; 20000 -15.7

CSV band table (phone-app EQs)

105,9.8,0.7
40,3.4,2
90,-2.2,1.4
180,0.8,1.4
375,1.3,1.4
750,0.3,1.4
1500,1.5,1.4
3000,9.4,1.4
6000,4.3,1.4
10000,3.0,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.