AutoEq / EqualizerAPO preset for Kinera - Celest Plutus Beast IEM - 3.5mm / Blue

Generated from this product's measured frequency response (source: AutoEq · Fahryst), corrected toward an approximate Harman in-ear (IE 2019) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# Kinera - Celest Plutus Beast IEM - 3.5mm / Blue - AutoEq-style parametric preset (measured: AutoEq · Fahryst)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman in-ear (IE 2019) target; estimate, treat as a starting point)
Preamp: -4.9 dB
Filter 1: ON LSC Fc 105 Hz Gain -0.7 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain 0.3 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain -0.4 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain -1.4 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain 0.6 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain 1.7 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain -2.5 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain -0.5 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain 4.6 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain 1.9 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -8.1 dB
GraphicEQ: 20 -0.9; 27 -0.9; 36 -0.4; 47 -0.3; 63 -0.5; 84 -0.9; 112 -1.2; 150 -1.4; 200 -1.3; 267 -0.2; 356 0.4; 474 0.9; 632 1.5; 843 1.0; 1125 -0.2; 1500 -1.8; 2000 -4.3; 2667 -0.1; 3557 0.4; 4743 2.9; 6325 7.8; 8434 -4.3; 11247 4.2; 14998 7.2; 20000 6.5

CSV band table (phone-app EQs)

105,-0.7,0.7
40,0.3,2
90,-0.4,1.4
180,-1.4,1.4
375,0.6,1.4
750,1.7,1.4
1500,-2.5,1.4
3000,-0.5,1.4
6000,4.6,1.4
10000,1.9,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.