AutoEq / EqualizerAPO preset for JBL Tune Beam TWS Earbuds with Active Noise Cancellation (White)

Generated from this product's measured frequency response (source: AutoEq · Rtings), corrected toward an approximate Harman in-ear (IE 2019) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# JBL Tune Beam TWS Earbuds with Active Noise Cancellation (White) - AutoEq-style parametric preset (measured: AutoEq · Rtings)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman in-ear (IE 2019) target; estimate, treat as a starting point)
Preamp: -2.8 dB
Filter 1: ON LSC Fc 105 Hz Gain -2.3 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain -2.0 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain 0.9 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain 2.5 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain 1.1 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain -0.6 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain 1.0 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain -0.9 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain -3.4 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain 0.6 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -26.2 dB
GraphicEQ: 20 -1.3; 27 -2.8; 36 -3.7; 47 -4.1; 63 -3.1; 84 -0.5; 112 0.9; 150 2.9; 200 1.9; 267 1.8; 356 2.0; 474 0.6; 632 -0.5; 843 -0.0; 1125 0.4; 1500 0.8; 2000 0.1; 2667 -1.1; 3557 -1.7; 4743 -2.9; 6325 -3.3; 8434 -2.3; 11247 -2.0; 14998 9.2; 20000 25.9

CSV band table (phone-app EQs)

105,-2.3,0.7
40,-2.0,2
90,0.9,1.4
180,2.5,1.4
375,1.1,1.4
750,-0.6,1.4
1500,1.0,1.4
3000,-0.9,1.4
6000,-3.4,1.4
10000,0.6,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.