AutoEq / EqualizerAPO preset for JBL Tune 220TWS True Wireless Earbuds - Blue

Generated from this product's measured frequency response (source: AutoEq · Rtings), corrected toward an approximate Harman in-ear (IE 2019) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# JBL Tune 220TWS True Wireless Earbuds - Blue - AutoEq-style parametric preset (measured: AutoEq · Rtings)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman in-ear (IE 2019) target; estimate, treat as a starting point)
Preamp: -12.3 dB
Filter 1: ON LSC Fc 105 Hz Gain 12.0 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain 2.5 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain -4.1 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain 4.5 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain 2.0 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain 0.0 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain -3.1 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain 0.9 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain 0.8 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain 0.6 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -30.6 dB
GraphicEQ: 20 30.3; 27 27.1; 36 24.3; 47 20.9; 63 16.7; 84 11.8; 112 8.6; 150 7.5; 200 6.0; 267 5.2; 356 3.0; 474 0.8; 632 -0.4; 843 0.7; 1125 -0.7; 1500 -3.2; 2000 -3.3; 2667 -1.1; 3557 2.3; 4743 3.4; 6325 -0.2; 8434 -2.4; 11247 3.3; 14998 0.6; 20000 -5.7

CSV band table (phone-app EQs)

105,12.0,0.7
40,2.5,2
90,-4.1,1.4
180,4.5,1.4
375,2.0,1.4
750,0.0,1.4
1500,-3.1,1.4
3000,0.9,1.4
6000,0.8,1.4
10000,0.6,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.