AutoEq / EqualizerAPO preset for JBL TUNE 120TWS-Truly wireless in-ear Earphones - Black

Generated from this product's measured frequency response (source: AutoEq · Rtings), corrected toward an approximate Harman in-ear (IE 2019) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# JBL TUNE 120TWS-Truly wireless in-ear Earphones - Black - AutoEq-style parametric preset (measured: AutoEq · Rtings)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman in-ear (IE 2019) target; estimate, treat as a starting point)
Preamp: -4.5 dB
Filter 1: ON LSC Fc 105 Hz Gain 4.2 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain 1.2 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain -2.9 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain 1.6 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain 0.9 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain 1.0 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain -0.2 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain -2.3 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain 1.9 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain -7.2 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -6.3 dB
GraphicEQ: 20 6.0; 27 5.5; 36 5.2; 47 4.2; 63 1.9; 84 0.0; 112 0.1; 150 1.6; 200 1.7; 267 1.8; 356 1.1; 474 0.8; 632 1.5; 843 1.2; 1125 -0.9; 1500 0.2; 2000 -0.1; 2667 -4.4; 3557 -0.8; 4743 2.0; 6325 0.8; 8434 -1.7; 11247 -10.5; 14998 -7.5; 20000 -15.3

CSV band table (phone-app EQs)

105,4.2,0.7
40,1.2,2
90,-2.9,1.4
180,1.6,1.4
375,0.9,1.4
750,1.0,1.4
1500,-0.2,1.4
3000,-2.3,1.4
6000,1.9,1.4
10000,-7.2,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.