AutoEq / EqualizerAPO preset for JBL Tour One M3 Smart Tx Noise Cancelling Headphones (Blue)

Generated from this product's measured frequency response (source: AutoEq · Rtings), corrected toward an approximate Harman over-ear (OE 2018) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# JBL Tour One M3 Smart Tx Noise Cancelling Headphones (Blue) - AutoEq-style parametric preset (measured: AutoEq · Rtings)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman over-ear (OE 2018) target; estimate, treat as a starting point)
Preamp: -1.8 dB
Filter 1: ON LSC Fc 105 Hz Gain -2.2 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain 1.1 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain -1.6 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain -3.1 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain -1.8 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain 0.2 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain 1.2 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain 1.5 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain -0.9 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain -1.9 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -3.9 dB
GraphicEQ: 20 -3.1; 27 -2.4; 36 -1.2; 47 -1.4; 63 -2.5; 84 -3.3; 112 -4.1; 150 -3.7; 200 -4.0; 267 -3.4; 356 -2.7; 474 -1.0; 632 -0.4; 843 0.2; 1125 1.0; 1500 2.2; 2000 0.5; 2667 -0.8; 3557 3.6; 4743 3.3; 6325 -2.4; 8434 -5.7; 11247 0.1; 14998 -2.5; 20000 -17.1

CSV band table (phone-app EQs)

105,-2.2,0.7
40,1.1,2
90,-1.6,1.4
180,-3.1,1.4
375,-1.8,1.4
750,0.2,1.4
1500,1.2,1.4
3000,1.5,1.4
6000,-0.9,1.4
10000,-1.9,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.