AutoEq / EqualizerAPO preset for HIFIMAN HE-R9 Dynamic Closed-Back Headphones - HE-R9 Only

Generated from this product's measured frequency response (source: AutoEq · Auriculares Argentina), corrected toward an approximate Harman over-ear (OE 2018) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# HIFIMAN HE-R9 Dynamic Closed-Back Headphones - HE-R9 Only - AutoEq-style parametric preset (measured: AutoEq · Auriculares Argentina)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman over-ear (OE 2018) target; estimate, treat as a starting point)
Preamp: -5.9 dB
Filter 1: ON LSC Fc 105 Hz Gain 0.1 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain -1.3 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain -5.3 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain -5.7 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain -0.4 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain -2.7 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain 5.6 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain 4.8 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain -0.4 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain 1.1 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -8.0 dB
GraphicEQ: 20 2.3; 27 0.2; 36 -1.3; 47 -3.3; 63 -4.6; 84 -6.1; 112 -6.6; 150 -6.8; 200 -6.7; 267 -5.7; 356 -1.1; 474 -0.0; 632 -2.4; 843 -2.1; 1125 2.2; 1500 6.5; 2000 6.9; 2667 7.7; 3557 0.3; 4743 4.6; 6325 2.5; 8434 -4.9; 11247 4.2; 14998 -1.5; 20000 -23.1

CSV band table (phone-app EQs)

105,0.1,0.7
40,-1.3,2
90,-5.3,1.4
180,-5.7,1.4
375,-0.4,1.4
750,-2.7,1.4
1500,5.6,1.4
3000,4.8,1.4
6000,-0.4,1.4
10000,1.1,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.