AutoEq / EqualizerAPO preset for FiR Audio Frontier Series Radon 6 Limited Edition

Generated from this product's measured frequency response (source: AutoEq · Fahryst), corrected toward an approximate Harman in-ear (IE 2019) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# FiR Audio Frontier Series Radon 6 Limited Edition | Universal Tribrid IEMs - New - AutoEq-style parametric preset (measured: AutoEq · Fahryst)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman in-ear (IE 2019) target; estimate, treat as a starting point)
Preamp: -2.1 dB
Filter 1: ON LSC Fc 105 Hz Gain -2.3 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain -0.5 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain -3.1 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain -4.3 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain -3.8 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain -0.7 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain 1.5 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain 1.8 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain -0.3 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain -4.3 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -3.2 dB
GraphicEQ: 20 -2.0; 27 -2.7; 36 -3.0; 47 -3.6; 63 -4.4; 84 -5.3; 112 -5.7; 150 -5.7; 200 -5.8; 267 -5.1; 356 -4.7; 474 -4.0; 632 -2.1; 843 -0.3; 1125 0.5; 1500 1.8; 2000 1.6; 2667 0.6; 3557 2.9; 4743 0.5; 6325 0.8; 8434 -4.5; 11247 -0.0; 14998 -12.2; 20000 -16.3

CSV band table (phone-app EQs)

105,-2.3,0.7
40,-0.5,2
90,-3.1,1.4
180,-4.3,1.4
375,-3.8,1.4
750,-0.7,1.4
1500,1.5,1.4
3000,1.8,1.4
6000,-0.3,1.4
10000,-4.3,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.