AutoEq / EqualizerAPO preset for Final - B3

Generated from this product's measured frequency response (source: AutoEq · Jaytiss), corrected toward an approximate Harman in-ear (IE 2019) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# Final - B3 - AutoEq-style parametric preset (measured: AutoEq · Jaytiss)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman in-ear (IE 2019) target; estimate, treat as a starting point)
Preamp: -6.5 dB
Filter 1: ON LSC Fc 105 Hz Gain 6.2 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain -0.5 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain -4.5 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain -3.7 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain -2.4 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain -0.4 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain 1.4 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain 3.9 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain 3.3 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain -2.8 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -19.4 dB
GraphicEQ: 20 10.3; 27 7.5; 36 5.4; 47 3.4; 63 1.4; 84 -0.7; 112 -2.3; 150 -3.5; 200 -4.6; 267 -3.9; 356 -3.1; 474 -2.3; 632 -1.0; 843 0.0; 1125 0.4; 1500 2.0; 2000 3.7; 2667 3.7; 3557 5.0; 4743 5.5; 6325 3.6; 8434 -2.3; 11247 -1.6; 14998 -1.2; 20000 19.1

CSV band table (phone-app EQs)

105,6.2,0.7
40,-0.5,2
90,-4.5,1.4
180,-3.7,1.4
375,-2.4,1.4
750,-0.4,1.4
1500,1.4,1.4
3000,3.9,1.4
6000,3.3,1.4
10000,-2.8,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.