AutoEq / EqualizerAPO preset for FAAEAL - Iris 2.0 Wired Earphone - Grey

Generated from this product's measured frequency response (source: AutoEq · Super Review), corrected toward an approximate Harman in-ear (IE 2019) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# FAAEAL - Iris 2.0 Wired Earphone - Grey - AutoEq-style parametric preset (measured: AutoEq · Super Review)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman in-ear (IE 2019) target; estimate, treat as a starting point)
Preamp: -12.3 dB
Filter 1: ON LSC Fc 105 Hz Gain 12.0 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain 0.5 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain -9.6 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain -3.1 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain -1.1 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain 0.2 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain -1.1 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain -4.0 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain 9.5 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain -2.0 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -54.9 dB
GraphicEQ: 20 29.6; 27 23.8; 36 19.1; 47 14.1; 63 8.7; 84 3.4; 112 -0.2; 150 -2.2; 200 -3.0; 267 -2.3; 356 -1.6; 474 -1.7; 632 -1.1; 843 -0.5; 1125 0.9; 1500 0.4; 2000 -7.7; 2667 -3.6; 3557 -0.2; 4743 2.7; 6325 12.4; 8434 2.7; 11247 -0.9; 14998 1.1; 20000 54.6

CSV band table (phone-app EQs)

105,12.0,0.7
40,0.5,2
90,-9.6,1.4
180,-3.1,1.4
375,-1.1,1.4
750,0.2,1.4
1500,-1.1,1.4
3000,-4.0,1.4
6000,9.5,1.4
10000,-2.0,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.