AutoEq / EqualizerAPO preset for Empire Ears Valkyrie MK II In-Ear Headphones - Open Box - Clearance - No pacakging - Comes with carry case and cable with 2.5mm termination

Generated from this product's measured frequency response (source: AutoEq · HypetheSonics), corrected toward an approximate Harman in-ear (IE 2019) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# Empire Ears Valkyrie MK II In-Ear Headphones - Open Box - Clearance - No pacakging - Comes with carry case and cable with 2.5mm termination - AutoEq-style parametric preset (measured: AutoEq · HypetheSonics)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman in-ear (IE 2019) target; estimate, treat as a starting point)
Preamp: -2.3 dB
Filter 1: ON LSC Fc 105 Hz Gain -5.8 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain -0.1 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain 0.1 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain -2.7 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain -0.4 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain 2.0 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain -3.8 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain -2.5 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain -4.5 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain -6.8 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -1.6 dB
GraphicEQ: 20 -7.9; 27 -7.1; 36 -6.0; 47 -5.1; 63 -4.5; 84 -4.2; 112 -3.9; 150 -3.6; 200 -3.4; 267 -1.9; 356 -0.8; 474 0.1; 632 1.3; 843 0.9; 1125 -1.2; 1500 -4.4; 2000 -5.5; 2667 -4.0; 3557 -2.9; 4743 -6.0; 6325 -4.4; 8434 -7.4; 11247 -8.9; 14998 -8.6; 20000 -7.4

CSV band table (phone-app EQs)

105,-5.8,0.7
40,-0.1,2
90,0.1,1.4
180,-2.7,1.4
375,-0.4,1.4
750,2.0,1.4
1500,-3.8,1.4
3000,-2.5,1.4
6000,-4.5,1.4
10000,-6.8,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.