AutoEq / EqualizerAPO preset for Edifier P180 Plus Wired Earphones - 3.5mm Jack

Generated from this product's measured frequency response (source: AutoEq · Innerfidelity), corrected toward an approximate Harman in-ear (IE 2019) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# Edifier P180 Plus Wired Earphones - 3.5mm Jack - AutoEq-style parametric preset (measured: AutoEq · Innerfidelity)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman in-ear (IE 2019) target; estimate, treat as a starting point)
Preamp: -12.3 dB
Filter 1: ON LSC Fc 105 Hz Gain 12.0 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain 1.6 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain -10.8 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain -3.9 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain -1.6 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain 1.8 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain -4.7 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain -6.2 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain -3.5 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain -4.3 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -27.6 dB
GraphicEQ: 20 27.3; 27 23.9; 36 19.8; 47 15.0; 63 8.7; 84 1.9; 112 -2.6; 150 -3.4; 200 -4.1; 267 -2.9; 356 -2.7; 474 -1.6; 632 -0.1; 843 0.1; 1125 -0.2; 1500 -4.7; 2000 -11.7; 2667 -10.0; 3557 -3.6; 4743 -2.7; 6325 -6.9; 8434 -6.7; 11247 -4.2; 14998 -6.4; 20000 -2.7

CSV band table (phone-app EQs)

105,12.0,0.7
40,1.6,2
90,-10.8,1.4
180,-3.9,1.4
375,-1.6,1.4
750,1.8,1.4
1500,-4.7,1.4
3000,-6.2,1.4
6000,-3.5,1.4
10000,-4.3,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.