AutoEq / EqualizerAPO preset for Binary × Gizaudio Chopin 1DD+3BA Hybrid in-Ear Monitors Earphones - Nocturne 3.5mm-Velvet S

Generated from this product's labeled estimate curve - the family tuning the product page graphs, derived from its driver type and tuning family, not a lab measurement - corrected toward an approximate Harman in-ear (IE 2019) target. When a measured curve for this product lands, the preset regenerates from it automatically. Treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# Binary × Gizaudio Chopin 1DD+3BA Hybrid in-Ear Monitors Earphones - Nocturne 3.5mm-Velvet S - AutoEq-style parametric preset (estimated: family tuning (not a measurement))
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman in-ear (IE 2019) target; estimate, treat as a starting point)
Preamp: -4.5 dB
Filter 1: ON LSC Fc 105 Hz Gain -1.2 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain 0.2 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain -2.8 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain -3.7 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain 0.2 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain -0.4 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain 1.4 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain 4.2 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain 1.8 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain -5.8 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -4.9 dB
GraphicEQ: 20 -1.2; 27 -1.3; 36 -1.4; 47 -1.6; 63 -2.5; 84 -3.8; 112 -5.0; 150 -4.6; 200 -4.2; 267 -2.3; 356 -0.4; 474 -0.0; 632 -0.1; 843 -0.0; 1125 0.8; 1500 2.1; 2000 3.3; 2667 4.6; 3557 4.2; 4743 3.0; 6325 1.9; 8434 -1.1; 11247 -6.5; 14998 -12.2; 20000 -23.9

CSV band table (phone-app EQs)

105,-1.2,0.7
40,0.2,2
90,-2.8,1.4
180,-3.7,1.4
375,0.2,1.4
750,-0.4,1.4
1500,1.4,1.4
3000,4.2,1.4
6000,1.8,1.4
10000,-5.8,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

This preset comes from an estimated curve - the file header says so, and the graph on the product page shows the same estimate. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.