AutoEq / EqualizerAPO preset for Beyerdynamic DT 700 Pro X (48 ohms)

Generated from this product's measured frequency response (source: AutoEq · Kuulokenurkka), corrected toward an approximate Harman over-ear (OE 2018) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# Beyerdynamic DT 700 Pro X (48 ohms) - AutoEq-style parametric preset (measured: AutoEq · Kuulokenurkka)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman over-ear (OE 2018) target; estimate, treat as a starting point)
Preamp: -3.5 dB
Filter 1: ON LSC Fc 105 Hz Gain 2.4 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain 0.3 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain 0.3 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain 1.5 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain 3.2 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain -0.4 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain -1.2 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain 3.1 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain -0.7 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain 1.2 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -7.8 dB
GraphicEQ: 20 2.8; 27 2.4; 36 2.3; 47 2.8; 63 3.5; 84 3.3; 112 0.3; 150 0.7; 200 2.7; 267 5.4; 356 3.4; 474 1.4; 632 0.4; 843 -0.3; 1125 0.2; 1500 -0.0; 2000 -1.1; 2667 -1.6; 3557 7.5; 4743 0.4; 6325 -2.8; 8434 -1.4; 11247 -0.9; 14998 2.5; 20000 -9.5

CSV band table (phone-app EQs)

105,2.4,0.7
40,0.3,2
90,0.3,1.4
180,1.5,1.4
375,3.2,1.4
750,-0.4,1.4
1500,-1.2,1.4
3000,3.1,1.4
6000,-0.7,1.4
10000,1.2,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.