AutoEq / EqualizerAPO preset for Bang & Olufsen Beoplay H9 3rd Gen - Over-Ear Headphone - ANC - Argilla Bright

Generated from this product's measured frequency response (source: AutoEq · oratory1990), corrected toward an approximate Harman over-ear (OE 2018) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# Bang & Olufsen Beoplay H9 3rd Gen - Over-Ear Headphone - ANC - Argilla Bright - AutoEq-style parametric preset (measured: AutoEq · oratory1990)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman over-ear (OE 2018) target; estimate, treat as a starting point)
Preamp: -2.1 dB
Filter 1: ON LSC Fc 105 Hz Gain -8.3 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain -1.0 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain -1.9 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain -7.1 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain -3.0 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain 1.8 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain 0.1 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain -2.0 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain -0.8 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain -3.5 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -3.4 dB
GraphicEQ: 20 -9.6; 27 -10.7; 36 -10.1; 47 -8.0; 63 -8.5; 84 -8.4; 112 -8.8; 150 -8.8; 200 -8.7; 267 -6.8; 356 -4.5; 474 -1.5; 632 0.9; 843 1.2; 1125 -0.1; 1500 0.0; 2000 0.3; 2667 -2.3; 3557 -4.1; 4743 3.1; 6325 -2.8; 8434 -4.1; 11247 -2.9; 14998 -7.9; 20000 -11.8

CSV band table (phone-app EQs)

105,-8.3,0.7
40,-1.0,2
90,-1.9,1.4
180,-7.1,1.4
375,-3.0,1.4
750,1.8,1.4
1500,0.1,1.4
3000,-2.0,1.4
6000,-0.8,1.4
10000,-3.5,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.