AutoEq / EqualizerAPO preset for Audio-Technica Pro: BPHS1 Broadcast Stereo Headset - XLR (BPHS1-XF4)

Generated from this product's measured frequency response (source: AutoEq · Filk), corrected toward an approximate Harman over-ear (OE 2018) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# Audio-Technica Pro: BPHS1 Broadcast Stereo Headset - XLR (BPHS1-XF4) - AutoEq-style parametric preset (measured: AutoEq · Filk)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman over-ear (OE 2018) target; estimate, treat as a starting point)
Preamp: -12.3 dB
Filter 1: ON LSC Fc 105 Hz Gain 12.0 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain -0.6 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain -5.0 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain 2.5 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain 5.6 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain 0.1 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain -1.3 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain 2.5 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain 11.7 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain -3.6 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -27.6 dB
GraphicEQ: 20 27.3; 27 21.8; 36 17.2; 47 13.3; 63 10.1; 84 7.7; 112 6.1; 150 4.9; 200 4.0; 267 5.1; 356 6.5; 474 5.3; 632 1.5; 843 0.3; 1125 0.5; 1500 0.2; 2000 -0.8; 2667 1.2; 3557 5.6; 4743 17.9; 6325 10.8; 8434 -3.7; 11247 1.4; 14998 1.7; 20000 3.4

CSV band table (phone-app EQs)

105,12.0,0.7
40,-0.6,2
90,-5.0,1.4
180,2.5,1.4
375,5.6,1.4
750,0.1,1.4
1500,-1.3,1.4
3000,2.5,1.4
6000,11.7,1.4
10000,-3.6,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.