AutoEq / EqualizerAPO preset for Audio-Technica ATH-M50xBT2 Wireless Over-Ear Headphones

Generated from this product's measured frequency response (source: AutoEq · Rtings), corrected toward an approximate Harman over-ear (OE 2018) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt

Parametric preset (AutoEq / EqualizerAPO format)

# Audio-Technica ATH-M50xBT2 Wireless Over-Ear Headphones - AutoEq-style parametric preset (measured: AutoEq · Rtings)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman over-ear (OE 2018) target; estimate, treat as a starting point)
Preamp: -5.9 dB
Filter 1: ON LSC Fc 105 Hz Gain 3.8 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain -0.1 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain -2.6 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain 0.8 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain 5.1 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain -0.4 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain 0.4 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain 2.7 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain 5.6 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain -7.6 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -7.7 dB
GraphicEQ: 20 5.9; 27 4.5; 36 3.4; 47 2.6; 63 2.2; 84 0.4; 112 -0.5; 150 -0.2; 200 1.6; 267 6.3; 356 5.4; 474 2.8; 632 1.3; 843 0.5; 1125 0.4; 1500 1.5; 2000 1.7; 2667 0.7; 3557 7.4; 4743 5.2; 6325 6.1; 8434 -6.2; 11247 -5.5; 14998 -6.9; 20000 -9.6

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.