AutoEq / EqualizerAPO preset for Audio Technica ATH-AD700X - Audiophile Open-air Headphones

Generated from this product's measured frequency response (source: AutoEq · oratory1990), corrected toward an approximate Harman over-ear (OE 2018) target. This is an estimate - every ear and every rig differs; treat the numbers as a starting point.

Download parametric .txt Download GraphicEQ.txt AutoEq CSV (Qudelix / Wavelet)

Parametric preset (AutoEq / EqualizerAPO format)

# Audio Technica ATH-AD700X - Audiophile Open-air Headphones - AutoEq-style parametric preset (measured: AutoEq · oratory1990)
# AutoEq-style parametric preset - TheTuningChoice (approximate Harman over-ear (OE 2018) target; estimate, treat as a starting point)
Preamp: -11.3 dB
Filter 1: ON LSC Fc 105 Hz Gain 11.0 dB Q 0.70
Filter 2: ON PK Fc 40 Hz Gain 0.6 dB Q 2.00
Filter 3: ON PK Fc 90 Hz Gain -2.6 dB Q 1.40
Filter 4: ON PK Fc 180 Hz Gain -0.1 dB Q 1.40
Filter 5: ON PK Fc 375 Hz Gain 1.0 dB Q 1.40
Filter 6: ON PK Fc 750 Hz Gain 0.1 dB Q 1.40
Filter 7: ON PK Fc 1500 Hz Gain 0.5 dB Q 1.40
Filter 8: ON PK Fc 3000 Hz Gain 5.4 dB Q 1.40
Filter 9: ON PK Fc 6000 Hz Gain 7.2 dB Q 1.40
Filter 10: ON PK Fc 10000 Hz Gain -0.4 dB Q 2.00

GraphicEQ line (EqualizerAPO)

Preamp: -15.8 dB
GraphicEQ: 20 15.5; 27 13.3; 36 11.2; 47 9.4; 63 7.3; 84 4.9; 112 3.1; 150 1.5; 200 0.3; 267 0.8; 356 1.2; 474 0.9; 632 1.0; 843 0.5; 1125 0.3; 1500 1.1; 2000 4.0; 2667 7.2; 3557 6.0; 4743 9.7; 6325 7.5; 8434 2.9; 11247 0.3; 14998 1.3; 20000 -12.5

CSV band table (phone-app EQs)

105,11.0,0.7
40,0.6,2
90,-2.6,1.4
180,-0.1,1.4
375,1.0,1.4
750,0.1,1.4
1500,0.5,1.4
3000,5.4,1.4
6000,7.2,1.4
10000,-0.4,2

How this format loads

EqualizerAPO: the .txt goes in your config folder and is included from config.txt (the parametric filters apply system-wide on Windows). Wavelet and most DAPs accept the same band table typed into their parametric EQ: same frequencies, same gains, same Q. Preamp exists so the loudest boosted band cannot clip.

Qudelix-5K / 71: the CSV is the AutoEq interchange the app's EQ import accepts - open the EQ screen, import/paste, and the ten bands above land as parametric filters (connect the app to the dongle first). Wavelet (Android): the same CSV feeds its parametric-EQ import; on setups without import, the band table above is short enough to type in by hand. Menu names move between app versions - the numbers stay the same.

Facts on this page come from the measured curve on file; the target curve and the fit are approximations. Nothing here is a recommendation to EQ - it is the preset, labeled, for people who already EQ.